How To Repair LED Bulb? Full Guide 2022

Repairing LED light bulbs is a quick and easy process that can be completed in just a few minutes. In most cases, the fix only requires a small screwdriver and some patience. By following these simple steps, you can have your LED light bulb up and running again in no time and you will get the detailed and step by step guide on about how to repair led bulb?

Step 1: Remove the old bulb

The first step to repairing your LED light bulb is to detach it from whatever fixture you currently have capturing its energy. Look on the base of your current LED bulb and you will see a small screw that keeps this in place. Using either a flathead or Phillips-head screwdriver, remove this screw and pull the bulb out of its base. Be careful not to drop or mishandle your old LED bulb as this may cause damage and could ruin your repair.

Step 2: Cleaning and inspecting your old/damaged LED bulb

Once you have removed the LED light bulb from its base, it is time to clean off any dirt or debris that may be on its exterior. If dirt is present, carefully wipe the dirt away with a clean rag. Now it’s time to inspect your LED bulb for any damages that may have occurred through use. Take note of any dark spots or cracks that you find; these are signs that your old LED bulb has reached the end of its life and will not be able to function properly.

Step 3: Screw in your new LED bulb

Inspect the base of your fixture for a screw that is used as a light switch mechanism. Take note of this as you will need to remove it before attaching the new LED light bulb. Once you have done so, insert your LED light bulb into its holding base and secure tightly with the small screw from step 1. Now it’s time to turn on your old fixture and see if our repair has worked! Your LED bulb should now shine bright as if nothing was ever wrong with it!

If this does not work, try soft resetting your surge protector then try soft/hard resetting your device itself. If that does not work, it could be the actual device.

FAQs about how to repair led bulb

What if my LED light is broken?

If your LED light is broken, the fix will be the same as described in this article. The only difference you may run into when following these steps is that there may not be a screw to hold it in place. In this case, use hot glue to keep your new LED bulb in its holding base. Also, remember that the LED light bulb may feel a little loose when following these steps because it is an older model and was made differently.

How long will my new LED last?

LED bulbs typically last for around 50,000 hours or more! Even if your repair does not work, you can expect to only have to do this another few times before you finally need to buy a new one since they are known to be so durable.

What happens if I turn on the switch but nothing works?

If turning on your switch does not produce any results (no light comes up), then there is probably something wrong with either the fixture mechanism itself or the actual power source connected to it. To fix this issue, use a different light switch and power source to see if it works. If this fails, you may want to contact a professional electrician to inspect your device for damage.

How long does it take to install a led bulb?

The time it takes to change out an LED light bulb depends largely on the fixture itself; however, most fixtures should not take more than 5 minutes! Sometimes they are hardwired (no screw) so pulling one out could be difficult but you can use a screwdriver. It might take longer if you have to turn off the power source first.

Conclusion

Well done on completing your first LED light bulb repair! If you ran into some trouble along the way or are uncertain of what to do next, then drop a comment below and we will get back to you as soon as possible. Also, you can read about how to dim a LED bulb.

And that’s it! Hope this helped you with your questions and gave you the solution that you require. 🙂

Leave a Comment