![How To Rewire A Swing Arm Floor Lamp [ Complete Guide 2022]](https://authoritybeasts.com/wp-content/uploads/2022/06/How-To-Rewire-A-Swing-Arm-Floor-Lamp-Complete-Guide-2022.png)
Wiring a swing arm floor lamp is not as complicated as it may seem. In this post, we will walk you through the steps on how to do it. So, if you are looking to rewire your swing arm floor lamp, read on! We will provide all the information you need to get the job done. Plus, we have some tips to help make the process a little easier. Let’s get started!
How To Rewire A Swing Arm Floor Lamp?
Gathering all the required stuff should be your first priority that you will need to follow along these steps. Let’s do that. You will need a screwdriver, wire cutters, and electrical tape. A new light bulb will also required. You will be ready to get started after collecting these requirements mentioned above.
The next step is to remove the old light bulb from the socket. To do this, unscrew the metal retaining ring that holds the light bulb in place. Once the retaining ring is removed, you can pull the light bulb out of the socket.
With the old light bulb removed, you can now install the new one. Simply screw the new light bulb into the socket. Be sure to screw it in tightly so that it does not come loose.
Now you will need to rewire the socket. To do this, cut the wires that are attached to the old socket. Then, strip about ½ inch of insulation from the end of each wire.
Next, twist the ends of the wires around the terminals on the new socket. Be sure to twist them tightly so that they are secure. Once they are twisted on, you can screw the retaining ring back into place.
Finally, screw the light bulb into place and turn on the power to test it out. If everything is working properly, your swing arm floor lamp is now successfully rewired!
Frequently Asked Questions
Q: Do I need to hire a professional to rewire my swing arm floor lamp?
Answer: No, you do not need to hire a professional. With a little patience and the right supplies, you can easily rewire your swing arm floor lamp yourself.
Q: What type of light bulb should I use in my rewired swing arm floor lamp?
Answer: You can use any type of light bulb that you like. However, we recommend using an LED bulbs as they are more energy-efficient and long-lasting.
Q: I’m having trouble removing the old light bulb from the socket. What should I do?
Answer: If you are having trouble removing the old light bulb, try using a pair of pliers. Gently grip the base of the light bulb and twist it counterclockwise until it comes loose.
Conclusion
We hope this post has been helpful in walking you through the process of rewiring a swing arm floor lamp. With a little patience and the right supplies, you can easily do it yourself. Also, there is a detailed and comprehensive guide about how to change 2 pin fluorescent light bulb, you can have a look onto that as well. If you have any questions or need assistance, feel free to contact us and we would be happy to help. Thanks for reading!